Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
2.
The setting screen for ECO Guidance Display at Key OFF
screen appears.
ON: Displays ECO Guidance (12) on the end screen.
OFF: Does not display ECO Guidance (12) on the end
screen.
On this screen, it is possible to perform the following operations
with switches F3 to F6.
F3: Moves to the next item (1 line below). When on the last
line, it moves to the first line.
F4: Moves to the previous item (1 line above). When on the
first line, it moves to the last line.
F5: Cancels the setting and returns to Configurations screen.
F6: Changes the setting and returns to Configurations screen.
MACHINE SETTINGS
Each item of this menu (b) is used for setting items of machine.
REVERSE HYDRAULIC FAN
NOTICE
•
After stopping the engine, check around the engine for
sticking dry leaves or dirt.
In particular, carefully check around the exhaust mani-
fold and turbocharger for sticking dirt which can
cause a fire.
•
If the aftertreatment devices regeneration pilot lamp
(A) lights up while the fan is rotated in reverse, the en-
gine speed may decrease to 1000 rpm, regardless of
the position of the fuel control dial.
In this case, the fan speed decreases and sufficient air
flow for cleaning the radiator cannot be obtained. Ac-
cordingly, wait under the current condition until after-
treatment devices regeneration pilot lamp (A) goes
out.
After the lamp goes out, the fan can rotate in reverse
by increasing the engine speed.
3-64
OPERATION
Advertisement
Chapters
Table of Contents
