Table of Contents
Advertisement
OPERATION
•
Input the already registered ID on the operator ID
changing screen and press F6. Then, the identified ID
can be changed.
A message is displayed below and the screen returns
to the Monitor Setting menu screen.
On the Monitor Setting menu screen, the inputted ID is
displayed in the column of "Operator ID".
•
When you press switch F1 on the operator ID chang-
ing screen, a message is displayed below and the
screen returns to the Monitor Setting menu screen.
On the Monitor Setting menu screen, as the same way
when the starting switch is ON and "SKIP" is selected,
"Operator ID" is displayed in the column of "****".
In this case, the operator ID is not identified.
•
When you press switch F6 after inputting the ID which
is not registered to the operator ID changing screen, a
message is displayed below and the screen returns to
the Monitor Setting menu screen.
In this case, the identified ID is not changed.
•
On the operator ID screen, if no switch is operated for
more than 30 seconds, the screen automatically
changes to the Monitor Setting menu screen.
In this case, the identified ID is not changed.
WHEN OPERATOR IDENTIFICATION FUNCTION IS AVAILABLE WITHOUT SKIP
When the operator identification function is available without
SKIP, the identified ID number is not displayed in the "Operator
ID" column of Monitor Setting screen.
1.
Select operator ID (5) on the Monitor Setting menu screen,
then press switch F6 for 1 second.
EXPLANATION OF COMPONENTS
3-79
Advertisement
Chapters
Table of Contents
