Komatsu D85EX-18 Operation & Maintenance Manual page 208

MACHINE OPERATIONS AND CONTROLS
3.
Pull the belt lightly to check that it is properly locked.
If the tongue is not inserted in the buckle, the seat belt
caution lamp is displayed at the top left of the machine
monitor.
METHOD FOR UNFASTENING SEAT BELT
Press button (5) in buckle (4) and remove tongue (3) from
buckle (4).
The belt is automatically wound in, hold grip (2) and return the
belt slowly to retractable device (1).
METHOD FOR OPERATIONS AND CHECKS BEFORE STARTING ENGINE
k k
• When starting the engine, check and make sure park-
ing brake lever (1) and work equipment lock lever (5)
are secured in LOCK position.
If the work equipment control levers are not locked
and they are touched by accident when starting the
engine, the work equipment may move unexpectedly,
and this may lead to a serious injury or death.
• When standing up from the operator's seat, always set
parking brake lever (1) and work equipment lock lever
(5) to LOCK position, regardless of whether the engine
is running or stopped.
1.
Check that battery disconnect switch (S) is in ON position
(I).
3-154
WARNING
OPERATION