Komatsu D85EX-18 Operation & Maintenance Manual page 83

OPERATION
(3) Work equipment lock pilot lamp
(4) Aftertreatment devices regeneration pilot lamp
(5) Aftertreatment devices regeneration disable pilot
lamp
(6) Message display
(7) Operating mode display
(8) Air conditioner pilot lamp
Meter display
(14) Service meter/clock
(15) Power train oil temperature gauge
(16) ECO gauge or drawbar pull gauge
(17) Engine coolant temperature gauge
(18) Multi-gauge
PILOT DISPLAY
The pilot display at the top of the screen consists of the pilot lamps to check the actuation of each function.
When the starting switch is ON, the pilot lamps light up when the display items are functioning.
PREHEATING PILOT LAMP
The preheating pilot lamp is displayed while the engine is pre-
heated before started at temperature below -3 °C.
When the temperature is low (in cold weather) and the auto-
matic preheating function operates, the preheating pilot lamp
lights up. When the preheating is completed, it goes out.
Automatic preheating is for a maximum of approximately 45
seconds.
FAN REVERSE ROTATION PILOT LAMP
The fan reverse pilot lamp lights up while the fan is rotating in
reverse.
For the reverse rotation of the fan, see "MACHINE SETTINGS
(3-64)".
EXPLANATION OF COMPONENTS
(9) Preheating pilot lamp
(10) Fan reverse pilot lamp
(11) Reverse travel slow mode pilot lamp
(12) Guidance display
(13) Gear speed display
(19) Hydraulic oil temperature gauge
(20) DEF level gauge
(21) Fuel gauge
(22) Fuel consumption gauge
3-29