Table of Contents
Advertisement
OPERATION
PROCEDURES FOR CLOSING FUEL FILLER PORT CAP
1.
After turning lever (1) in the (c) direction (counterclock-
wise), keep it in that position and fit the cap.
2.
Turn lever (1) in the (d) direction (clockwise) until it stops
at the stopper, and then tilt it in the (b) direction.
METHOD FOR OPENING AND CLOSING COVER WITH LOCK
METHOD FOR OPENING COVER WITH LOCK
1.
Insert the key into the key slot.
2.
Turn the key counterclockwise and open the cover by pulling the cover handle.
•
Cab door opener
Position (A): OPEN
Position (B): CLOSE (LOCK)
•
Cover other than cab door opener
Position (A): OPEN
Position (B): CLOSE (LOCK)
METHOD FOR LOCKING COVER WITH LOCK
1.
Close the cover and insert the key into the key slot.
2.
Turn the starting switch key to CLOSE position (B), then remove the key.
METHOD FOR OPENING AND CLOSING DEF TANK FILLER CAP COVER
•
When opening or closing the DEF tank filler cap cover, place the machine on a level place, lower the
work equipment to the ground, stop the engine, then perform the operation.
•
When opening it, do not release the handle until the stay is set in the lock position securely.
•
When closing it, hold the handle securely since the DEF tank filler cap cover may move down be-
cause of its own weight.
If it is not locked, it may close suddenly because of wind, etc.
MACHINE OPERATIONS AND CONTROLS
k
k
CAUTION
3-193
Advertisement
Chapters
Table of Contents
