Komatsu D85EX-18 Operation & Maintenance Manual page 127

OPERATION
F4: Moves to the previous item (1 line above). When on the first line, it moves to the last line on the previous
page.
F5: Cancels the setting and returns to the Screen Adjustment (Camera) screen.
F6: Change the setting and returns to the Screen Adjustment (Camera) screen.
SET GUIDE LINE DISPLAY MODE
1.
Select the Guide Line Display Mode on the Screen Adjust-
ment (Camera) screen.
2.
Press switch F6.
3.
The Guide Line Display Mode setting screen is displayed.
• OFF: Guide lines (Outline (A), Center Line (B)) are not
displayed.
• Outline: Only outlines (A) that indicate the machine
width and the distance from the rear end of the ma-
chine are displayed.
• Center Line: Only machine center line (B) is displayed.
• All : Both of Outline (A) and Center Line (B) are dis-
played.
On this screen, it is possible to perform the following operations
with switches F3 to F6.
F3: Moves to the next item (1 line below). When on the last
line, it moves to the first line.
F4: Moves to the previous item (1 line above). When on the
first line, it moves to the last line.
F5: Cancels the setting and returns to the Screen Adjustment
(Camera) screen.
F6: Change the setting and returns to the Screen Adjustment
(Camera) screen.
CLOCK ADJUSTMENT
The Clock Adjustment menu is used to change the setting of the clock displayed on the standard screen of the
monitor.
1.
Select clock adjustment (3) on the Monitor Setting menu
screen.
2.
Press switch F6.
EXPLANATION OF COMPONENTS
3-73