Komatsu D85EX-18 Operation & Maintenance Manual page 98

EXPLANATION OF COMPONENTS
3.
After the setting change of each item is complete, press
switch F2.
The memory saving screen is displayed.
4.
Check the setting of each item (on the left of the screen).
5.
Press switch F3 or F4 to move the yellow cursor to a mem-
ory number ("M1" to "M5") to save, and press switch F6.
The setting is saved by the above operation.
Memory - call up
1.
Press switch F1 on the "Mode Select" screen.
The mode memory call screen is displayed.
2.
Press switch F3 or F4 to move the yellow cursor to a mem-
ory number ("M1" to "M5") to call up.
As the cursor is set to the number, the setting stored in the
memory is displayed in the right side of the screen.
3.
Call up the selected setting by pressing switch F6.
3-44
OPERATION