Komatsu D85EX-18 Operation & Maintenance Manual page 134

EXPLANATION OF COMPONENTS
2.
The operator ID changing screen is displayed.
• Input the already registered ID on the operator ID
changing screen and press F6. Then, the identified ID
can be changed.
A message is displayed below and the screen returns
to the Monitor Setting menu screen.
• When you press switch F6 after inputting the ID which
is not registered to the operator ID changing screen, a
message is displayed below and the screen returns to
the Monitor Setting menu screen.
In this case, the identified ID is not changed.
• On the operator ID screen, if no switch is operated for
more than 30 seconds, the screen automatically
changes to the Monitor Setting menu screen.
In this case, the identified ID is not changed.
MESSAGE DISPLAY
On machines equipped with KOMTRAX, you can see the mes-
sages from your Komatsu distributor on this User Message
menu (g).
When there is any message, the User Message at the top of
the standard screen lights up.
3-80
OPERATION