Komatsu D85EX-18 Operation & Maintenance Manual page 125

OPERATION
2.
Use switches F2 to F6 to adjust brightness of the screen.
F2: Resets an adjusted value to default value.
F3: Moves the indicator to the left by one notch.
F4: Moves the indicator to the right by one notch.
F5: Cancels the change and returns to the monitor setting
menu screen.
F6: Accepts the change and returns to the monitor setting
menu screen.
REMARK
• If the light switch is at night mode ON, and the screen
is adjusted, it is possible to adjust the brightness of
the monitor screen (night mode).
• If the light switch is at day mode ON, and the screen is
adjusted, it is possible to adjust the brightness of the
monitor screen (day mode).
• As long as "*" mark is displayed in the upper right cor-
ner of the screen, brightness is automatically restrict-
ed by the machine monitor to protect the liquid crystal.
Screen adjustment may not change the screen bright-
ness as long as "*" mark is displayed. However, it is
not an error.
SCREEN ADJUSTMENT (CAMERA)
Never drive the machine (in reverse) while watching only the camera screen. Be sure to visually check
the safety around the machine.
The guide lines indicate blade width lines and a line 5 m away from the rear of the machine. When
changing the blade, ask your Komatsu distributor for adjustment of the camera screen.
1.
Select camera screen adjustment on the monitor setting
menu screen.
2.
Press switch F6.
On the Screen Adjustment screen, the following items related
to the camera screen can be set.
• Camera image screen brightness adjustment
• Camera view mode setting (Setting of Reverse Synchroni-
zation)
• Guide line display mode setting
On this screen, it is possible to perform the following operations
with switches F3 to F6.
F3: Moves to the next item (1 line below). When on the last
line, it moves to the first line.
F4: Moves to the previous item (1 line above). When on the first line, it moves to the last line.
k k
CAUTION
EXPLANATION OF COMPONENTS
3-71