Komatsu D85EX-18 Operation & Maintenance Manual page 101

OPERATION
• It is possible to change the operation mode by pressing
the operation mode selector switch.
For the operation mode selector switch, see "WORKING
MODE SELECTOR SWITCH (3-43)".
When the operation mode is changed, the screen returns
automatically to the standard screen.
• It is possible to change the gear shift mode by pressing the
gear shift mode selector switch.
For the gear shift mode selector switch, see "WORKING
MODE SELECTOR SWITCH (3-45)".
When the gear shift mode is changed, the screen returns
automatically to the standard screen.
• It is possible to change the customize setting by pressing
the customize switch.
For the customize switch, see "CUSTOMIZE SWITCH
(3-43)".
After the customize setting, the screen automatically re-
turns to the standard screen.
• It is possible to stop the alarm buzzer for the warning item
where there is an abnormality, by pressing the buzzer can-
cel switch.
Even if the buzzer cancel switch is pressed, the camera
image display does not switch to another screen or return
to the standard screen.
Depending on the warning, alarm buzzer does not stop
sounding by pressing the buzzer cancel switch.
• It is possible to turn the reverse slow mode ON/OFF by
pressing the reverse slow mode selector switch.
For the reverse travel slow mode selector switch, see "RE-
VERSE SLOW MODE SWITCH (3-45)".
When the reverse travel slow mode selector switch is
pressed, the screen returns automatically to the standard
screen.
EXPLANATION OF COMPONENTS
3-47