Komatsu D85EX-18 Operation & Maintenance Manual page 97

OPERATION
WORKING MODE SELECTOR SWITCH
The operating mode selector switch is used for switching the
working mode of the engine.
Normally, it is possible to perform all operations in E mode, and
this mode reduces fuel consumption.
Compared with E mode, P mode has more power, but the fuel
consumption increases.
When the starting switch is turned to ON position, the mode
used for the previous operation is selected by default.
The selected mode is displayed at the top of the screen.
CUSTOMIZE SWITCH
To ensure safety, always stop the machine before operating the customize mode.
Press the customize switch, and the "Mode Select" screen is
displayed.
On the "Mode Select" screen, you can set and save the follow-
ing items as desired.
Item
Operating Mode Power/Economy
Gear Shift Mode Manual gear shift mode/ Automatic gear shift
mode
Reverse Slow ON/OFF
Auto Shift Down* ON/OFF
*: When manual shift mode is selected
Setting and saving each item
1.
Press switch F3 or F4 on the "Mode Select" screen to set
the yellow cursor to the target item of setting change, and
then press switch F6.
The setting change screen for the selected item is dis-
played.
2.
Press switch F3 or F4 to move the yellow cursor to a set-
ting to change, and press switch F6.
(The figure shows an example of the setting change
screen when the "Operating Mode" is selected.)
k k
CAUTION
Contents of setting
EXPLANATION OF COMPONENTS
3-43