Komatsu D85EX-18 Operation & Maintenance Manual page 120

EXPLANATION OF COMPONENTS
10. Since fan reverse rotation is set, start the engine.
After the engine is started, the machine monitor screen
displays as shown in the figure.
If the parking brake lever or work equipment lock lever is
set to FREE position while the fan is rotated in reverse, the
screen shown in the figure is displayed.
In this case, stop the fan reverse rotation by returning the
parking brake lock lever and work equipment lock lever to
LOCK positions or by pressing switch F5.
11. After finishing the work, press switch F5 and stop the fan
reverse rotation.
12. Set the fuel control dial to Low idle (MIN) position.
13. Turn the starting switch to OFF position to stop the engine.
3-66
OPERATION