FOREWORD
INTRODUCTION
MAIN USE OF MACHINE
This Komatsu machine is designed to be used mainly for the following work:
•
Dozing work
•
Leveling work
•
Cutting or ditching into hard or frozen ground
•
Works of felling trees and removing stumps
•
Pushing work
•
Ripping work
For details of work procedure, see OPERATION, "RECOMMENDED APPLICATIONS (3-182)".
DIRECTIONS OF MACHINE
In this Operation and Maintenance Manual, the directions of the machine (front, rear, right, left) are determined
according to the view from operator's seat (E) in the direction of travel (front) of the machine.
(A) Front
(B) Rear
(C) Left
VISIBILITY FROM OPERATOR'S SEAT
The visibility of this machine required by visibility standards (ISO 5006) are shown in the drawing below.
Proximity visibility
The figure below shows a visibility from the machine at a spot 1.0m away from outside the machine and 1.5m
above the ground. Shaded area (A) in the figure shows an area whose view is blocked by a part of the machine
(D) Right
(E) Operator's seat
(F) Sprocket
INTRODUCTION
1-7