Komatsu D85EX-18 Operation & Maintenance Manual page 202

MACHINE OPERATIONS AND CONTROLS
METHOD FOR ADJUSTING SEAT DIRECTION
You can change the direction of the seat to 12.5 ° on the right by pulling up the direction adjustment lever to
FREE position (F) and unlock it.
When using the ripper, the operator can work easily by directing the seat to the right.
1.
Pull up the direction adjustment lever to FREE position (F)
and unlock it.
The seat direction can be changed to 12.5 °.
2.
After changing the seat direction, return the lever to LOCK
position (L) securely.
METHOD FOR HEATING SEAT
Turn the seat heater switch ON.
(a): OFF position
(b): ON position
The backrest and seat surface are heated.
When the seat heater switch is turned ON, the heater in the seat operates. When the seat surface temperature
exceeds approximately 20 °C, the heater is turned OFF automatically. When the temperature decreases below
approximately 10 °C, the heater is turned ON automatically.
REMARK
When the seat surface temperature is above approximately 20 °C, the heater does not operated even if switch
(8) is turned ON.
AIR SUSPENSION SEAT
(if equipped)
3-148
OPERATION