Komatsu D85EX-18 Operation & Maintenance Manual page 116

EXPLANATION OF COMPONENTS
1.
Select "ECO Gauge display" (8) from "Configurations"
screen, then press switch F6.
2.
The "ECO Gauge Display" screen appears.
"Traction": Displays drawbar pull gauge (A) on the stand-
ard screen.
"Fuel Consump": Displays ECO gauge (B) on the standard
screen.
"OFF": Displays nothing on display (7).
On this screen, it is possible to perform the following operations
with switches F3 to F6.
F3: Moves to the next item (1 line below). When on the last
line, it moves to the first line on the next page.
F4: Moves to the previous item (1 line above). When on the
first line, it moves to the last line on the previous page.
F5: Cancels the setting and returns to "Configurations" screen.
F6: Changes the setting and returns to "Configurations" screen.
SET TARGET FUEL CONSUMPTION VALUE DISPLAYED IN ECO GAUGE
It is possible to change the target fuel consumption value (the upper limit value of the green range) of the ECO
gauge (7).
1.
Select the ECO Gauge Display Fuel Target Value (9) on
the Configurations screen, then press switch F6.
2.
ECO Gauge Display Fuel Target Value appears.
On this screen, it is possible to perform the following oper-
ations with switches F3 to F6.
F3: Decreases the target fuel consumption value by 1 ℓ/h.
F4: Increases the target fuel consumption value by 1 ℓ/h.
F5: Cancels the setting and returns to Configurations
screen.
F6: Changes the setting and returns to Configurations
screen.
3-62
OPERATION