Method For Checking Main Frame And Work Equipment (Blade And Ripper) - Komatsu D85EX-18 Operation & Maintenance Manual

MAINTENANCE PROCEDURE MAINTENANCE
If there is any loose bolt or hardened rubber, ask your Komatsu distributor for replacement.
METHOD FOR CHECKING FOR MISSING FUEL SPRAY PREVENTION CAP,
HARDENING OF RUBBER
The fuel spray prevention caps act to prevent the fuel from coming into contact with high-temperature parts of
the engine and causing a fire if the fuel should leak or spray out.
Check fuel spray prevention caps (1) to (11) and fuel spray prevention cover (12) visually or with a finger to see
if any of them has slipped off, or the rubber portion is hardened.
If there is any loose bolt or hardened rubber, ask your Komatsu distributor for replacement.
METHOD FOR CHECKING MAIN FRAME AND WORK EQUIPMENT (BLADE AND
RIPPER)
Perform this check every 1000 hours after the initial 4000 hours.
4-74