HANDLE AIR CONDITIONER
METHOD FOR AUTOMATIC OPERATION
1.
Turn auto switch (1) ON.
Set temperature (a) and air flow (b) are displayed.
2.
Use temperature control switch (2) to set to the desired
temperature.
The air flow, combination of vents, and selection of fresh or
recirculated air is automatically selected according to the
set temperature, and the air conditioner is operated auto-
matically to provide the set temperature.
REMARK
When vent display monitor (c) displays (d) or (e), and engine
coolant temperature is low, the air flow is automatically limited
to prevent cold air from blowing out.
3-202
OPERATION