Figure 37: Removing The Grounding Lug From The Chassis; Figure 38: Attaching The Grounding Wire To The Grounding Lug - Allied Telesis AT-SB*908 GEN2 Installation Manual

Figure 37. Removing the Grounding Lug from the Chassis
3. Insert one end of the grounding wire into the grounding lug, as shown
in Figure 38, and use a crimping tool to secure the wire to the
grounding lug.
Figure 38. Attaching the Grounding Wire to the Grounding Lug
4. Install the grounding lug on the rear panel of the chassis. Refer to
Figure 39 on page 86.
AT-SBx908 GEN2 Installation Guide for Virtual Chassis Stacking
85