Chapter 2: Virtual Chassis Stacking - Allied Telesis x530 Series Installation Manual

Chapter 2
Virtual Chassis Stacking
The following sections are discussed in this chapter:
"Overview" on page 60

"Stacking Guidelines" on page 61

"Stack Trunks" on page 63

"Stack Trunks of the Default 10Gbps SFP+ S1 and S2 Stacking Ports"

on page 64
"Stack Trunks of 5Gbps Copper Ports" on page 69

"Stack Trunks of 1Gbps Copper Ports" on page 72

"Stack Trunks of 1Gbps SFP Ports 1 to 24 on x530-28GSX Switches"

on page 74
"Invalid Stack Trunks" on page 76

"Master and Member Switches" on page 78

"Switch ID Numbers" on page 80

"Optional Feature Licenses" on page 81

"Mixed Switch Stacks" on page 82

"Planning the Stack" on page 85

"Configuring Mixed-Mode VCStacking" on page 86

"Stacking Worksheet" on page 87

Note
For more information on VCStack, refer to the Stacking Introduction
and Stacking Commands chapters in the Command Reference:
x530 Series Switches Running AlliedWare Plus Version 5.5.0 at
www.alliedtelesis.com/library.
59