Figure 30: Removing The Grounding Lug From The Chassis; Figure 31: Attaching The Grounding Wire To The Grounding Lug - Allied Telesis SwitchBlade x908 GEN2 Installation Manual

Figure 30. Removing the Grounding Lug from the Chassis
3. Insert one end of the grounding wire into the grounding lug, as shown
in Figure 31, and use a crimping tool to secure the wire to the
grounding lug.
Figure 31. Attaching the Grounding Wire to the Grounding Lug
4. Install the grounding lug on the rear panel of the chassis. Refer to
Figure 32 on page 70.
SBx908 GEN2 Installation Guide for Stand-alone Switches
69