Table of Contents
Advertisement
2.1.5
Switching the main monitor data using the function menu
The monitor list is displayed when the monitor selection in the function menu is selected.
If monitor data is switched from the monitor list, the new monitor data is registered and displayed in the fourth monitor.
(For the function menu, refer to
2.1.6
Switching the main monitor data using the parameter
The monitor indicator of the output voltage monitor is switched according to the setting of Pr.52 Operation panel main
monitor selection. When "17" (load meter), "18" (motor excitation current), or "24"(motor load factor) is set in Pr.52, however,
the monitor indicator of the output current monitor is switched accordingly.
2.1.7
Setting of the monitor data at power-ON (first priority monitor)
Set the monitor data that is displayed first at power-ON or when
While monitor data other than the faults history is displayed, press
ON.
NOTE
• For details on the monitor description, refer to the Instruction Manual of the inverter.
page
24.)
is pressed.
to set the monitor data to be displayed first at power-
(SET)
FUNCTION AND BASIC OPERATION
2
17
Advertisement
Table of Contents
