Parameter Setting Method - Mitsubishi Electric FR-E540-0.4K-EC Instruction Manual

3.2.4 Frequency setting
Set the frequency value used for operation performed under the operation command
given by the key (
RUN
This mode is displayed only in PU operation.
z
Frequency setting mode
Hz
PU
MODE SET REV
STOP
FWD
RESET
MODE
To 3.2.5 Parameter setting mode

3.2.5 Parameter setting method

With the exception of some parameters, parameter setting can be made only when the PU
operation mode is selected by the Pr. 79 setting.
y A parameter value may either be set by updating its parameter number or setting
the value digit-by-digit using the
y To write the setting, change it and press the
Note: If parameter write cannot be performed, refer to page 168.
or key) in the PU operation mode.
FWD REV
z
Set frequency changing
Change the set
frequency with
/
52
To frequency monitoring
z
Set frequency
write
SET
Hz
PU
key.
key for about 1.5 seconds.
SET
MODE
Hz
PU
Flicker
Hz
PU
3