Table of Contents
Advertisement
Unpacking, setting up and pre-settings
Adjust tray 2
Adjust tray 2 to a different Paper size if so desired.
1
Remove the tray.
2
Press the paper lifting plate down
until it locks in place.
3
Loosen the fastening screws of the
paper guides with a Phillips screw
driver.
4
Move the paper guides to the marks
of the desired Paper size.
5
Tighten the fastening screws of the
paper guides in the new position.
6
Set the paper in place between the
paper guides. The stack of paper
must not exceed the maximum
filling height (see the orange mark
on the tray).
Rev. 3.1.1/16.07.99
PagePro 25
2
2-17
Advertisement
Table of Contents
