Table of Contents
Advertisement
Caring for and maintaining your printer
5
Pull the paper feed roller down from
the guide rod.
6
Push the new paper feed roller up to
the stop on the guide rod.
Make sure that the rubber coating
faces away from the laser printer.
7
Push one of the safety brackets into
the groove on the guide rod
provided for it (of the paper feed
roller).
8
Press the damper under the paper
feed roller down and guide the loose
end of the guide rod back into the
bearing.
9
Secure the guide rod in place with
the second safety bracket.
Rev. 3.1.1/16.07.99
PagePro 25
8
8-13
Advertisement
Table of Contents
