Table of Contents
Advertisement
Installing optional accessories
4
Place the safety caps on the
stoppers.
5
Fasten the L-shaped stopper on the
right side of the paper source unit.
Use the long screws for this
purpose.
6
Place the paper source unit in the
location where the printer will be
standing when it is in operation.
Turn the wheel counter clockwise to
7
fasten the unit in place.
The adjusting device is located on
the lower right side of the paper
source unit.
Rev. 3.1.1/16.07.99
PagePro 25
7
7-9
Advertisement
Table of Contents
