Table of Contents
Advertisement
Working with the printer
3
Press the sides of the green bracket
together and move it to the mark of
the desired Paper size.
4
Press the green key and move it to
the mark of the desired Paper size.
5
Set the paper in place between the
paper guides. The stack of paper
must not exceed the maximum
filling height (see the orange mark
on the tray).
6
Close the tray.
7
Set the selection switch to the
Paper size you just loaded.
?
What if your Paper size is not
listed on the selection switch?
➜
Set the selection switch to "User
Set" and see the tip below.
Are you using special paper?
If you load special paper, envelopes or custom formats into tray 1, you
must make a special setting for this in the printer menu, see page 5-16.
Rev. 3.1.1/16.07.99
PagePro 25
6
6-5
Advertisement
Table of Contents
