Table of Contents
Advertisement
9
Problem
Uneven toner
density on the
printout
White spots on the
printout, text
missing
White or black lines
on the printout
9-20
Recognizing and eliminating problems
Possible cause
The imaging cartridge is
damaged.
The image transfer roller is
damaged.
The toner in the imaging
cartridge is low.
The paper is moist because of
high humidity in the air or from
being splashed with water.
The imaging cartridge is
damaged.
PagePro 25
Action to take
Remove the imaging cartridge
and check it over for damage. If
necessary, replace it with a new
imaging cartridge, see page 8-6.
Remove the image transfer roller
and check it over for damage. If
necessary, put in a new image
transfer roller, see page 8-9.
Remove the imaging cartridge
and shake it carefully to better
distribute the remaining toner. If
the problem persists, put in a
new imaging cartridge, see page
8-6.
Print the job again on dry paper.
Remove the imaging cartridge
and check it over for damage. If
necessary, replace it with a new
imaging cartridge, see page 8-6.
Rev. 3.1.1/16.07.99
Advertisement
Table of Contents
