Table of Contents
Advertisement
9
User call messages
These messages indicate errors that must be cleared by the user. Until
this happens, the print process cannot continue, or the printer cannot
return to READY status until.
LCD display
MANUAL LOAD
(paper) (user name)
LOAD
(paper) (user name)
LOAD TRAY X
(paper) (user name)
NO PAPER TRAY X
(paper) (user name)
TRAY X OPEN
(user name)
RAISE LCC
REMOVE PAPER H.TRANS
(user name)
REMOVE PAPER MAN. FEED
(user name)
OUT OF PAPER ALL TRAYS
COVER OPEN SIDE
PRINTER OPEN DUPLEX UNIT
PRINTER OPEN
TRAY2 COVER
PRINTER OPEN
TRAY3 COVER
PRINTER OPEN
TRAY4 COVER
PRINTER OPEN
TRAY5 COVER
PRINTER OPEN LCC COVER
PRINTER OPEN
HORZ. TRANSPORT
PRINTER OPEN
OUTP. TRANSPORT
9-28
Recognizing and eliminating problems
Description and actions to take
The printer is waiting for paper to be loaded into the
manual feed unit.
Load paper of the required size into the manual feed unit.
The printer is waiting for paper to be loaded.
Load paper of the required size into the manual feed unit.
The printer is waiting for paper to be loaded into the tray
indicated.
Load paper of the required size into the manual feed unit.
There is no more paper in the tray indicated. Load paper
of the required size into the manual feed unit.
The indicated tray was opened during data processing.
Close the tray.
The printer is positioning paper in the 2500-sheet tray.
There is paper on the horizontal transport unit.
Remove the paper from the horizontal transport unit.
There is paper on the manual feed bin.
Remove the paper from the manual feed bin.
All paper trays are empty.
Load paper of the required size into the manual feed unit.
The side cover of the printer is open.
Close the side cover.
The cover of the duplex unit is open.
Close the cover.
The side cover of tray 2 is open.
Close the side cover.
The side cover of tray 3 is open.
Close the side cover.
The side cover of tray 4 is open.
Close the side cover.
The side cover of tray 5 is open.
Close the side cover.
The side cover of the LCC tray is open.
Close the side cover.
The horizontal transport unit is open or the 10-bin
mailbox has not been properly engaged into the
horizontal transport unit.
Close the horizontal transport unit and check the
connection.
The output transport cover of the 5-bin mailbox is open.
Separate the 5-bin mailbox and the printer. Close the
cover.
PagePro 25
Rev. 3.1.1/16.07.99
Advertisement
Table of Contents
