Table of Contents
Advertisement
Recognizing and eliminating problems
9.7
Output problems
Heat and moisture may result in printed pages in A3, B4 and ledger
formats rolling up and falling out of the output bin after print output.
You can prevent this by reversing the PPM switch that is located on the
rear side of the printer.
This switch has two settings:
G
Setting "H":
G
Setting "L":
If large-format printed sheets roll up after leaving the machine, reduce the
output time of the print pages.
➜
Turn the PPM switch to the setting "L".
The output time is reduced for printed pages.
Rev. 3.1.1/16.07.99
H
L
The standard setting
Reduced output time.
PagePro 25
9
9-23
Advertisement
Table of Contents
