Table of Contents
Advertisement
7
7.7
Installing the 10-bin mailbox
The printer must be aligned to the height of the mailbox for you to be able
to instal the 10-bin mailbox. If necessary, refer to your customer service
technical specialist.
Preparing for installation of the 10-bin mailbox unit
Take the parts of the unit out of the carton and remove the protective
1
plastic sleeve.
2
Remove the packaging materials and adhesive strips.
Turn the printer OFF and remove the power plug and the interface plug
3
from the printer.
Installing the guide rail
1
Push the stabilizing rail of the
mailbox in the direction of the arrow.
2
Fasten the stabilizing rail in place
with the wing screw.
Set the two metal plates in place on
3
the left side of the printer.
7-22
Installing optional accessories
PagePro 25
Rev. 3.1.1/16.07.99
Advertisement
Table of Contents
