Table of Contents
Advertisement
6
Correcting the top offset
Setting corrections on the upper offset work for all trays.
1
Press the [ON LINE] key.
The display shows OFF-LINE. The printer has been switched Off Line.
2
Press the [MENU] key until SETTINGS MENU is displayed.
3
Press the [SCROLL] key until TOP OFFSET is displayed.
4
Press the [SELECT] key until the desired correction value for the top
offset is displayed.
❍
Increasing the value (+) reduces size of the top offset.
❍
Reducing the value (-) increases the size of the top offset.
Press the [COMFIRM KEY] to save your Offset correction.
5
An asterisk (*) is displayed on the right next to the selection.
6
Print out another test page to check your corrections to the offsets, see
page 6-14.
6-16
PagePro 25
Working with the printer
Rev. 3.1.1/16.07.99
Advertisement
Table of Contents
