Table of Contents
Advertisement
Recognizing and eliminating problems
6
Line up the arrow marks on the 10-
bin mailbox with those of the printer
by adjusting the long screws on the
two feet.
❍
Turn the screws
counterclockwise to raise the
10-bin mailbox
or
❍
turn them clockwise to lower the
10-bin mailbox.
7
Screw the four safety screws that
you unscrewed in step 5 back in
again.
8
Set the base plate back in place
again and close the lower swiveling
cover.
Secure the base plate in place with
9
the two screws and connect the
10-bin mailbox with the printer
again.
Rev. 3.1.1/16.07.99
PagePro 25
9
9-17
Advertisement
Table of Contents
