Table of Contents
Advertisement
1
➜
Perform only procedures that are described in this manual. Using the
machine improperly can result in a fire or electrical shock.
➜
Do not place any heavy objects on the machine.
➜
Do not open any flaps on the machine while printing is in progress.
➜
Do not turn the unit off while printing is in progress.
➜
Do not bring any magnetic objects in the vicinity of the machine.
➜
Do not use any inflammable sprays, liquids or gasses in the vicinity of
the machine.
➜
Do not remove any safety devices and do not alter the construction of
the machine. The unit is equipped with high-voltage components.
Using the machine improperly can result in a fire or electrical shock.
➜
Do not insert any paper clips of staples, or other small metal objects
into openings of the machine. The result could be electrical shock or a
fire. If a metal pieces should be taken into the machine, turn it off
immediately, disconnect the power cord and inform your customer
support technical specialist.
➜
Do not place coffee cups, drinking bottles or other containers with
liquids in them on the machine. If liquid gets into the machine the result
could be an electrical shock or a fire. If liquid does get into the
machine, turn it off immediately, disconnect the power cord and inform
your customer support technical specialist.
➜
If the machine becomes unusually hot, or if you notice smoke or an
unusual odor are coming from the machine, turn it off immediately and
remove the power cord from the socket. Inform your customer service
technical specialist.
1-6
PagePro 25
Introduction
Rev. 3.1.1/16.07.99
Advertisement
Table of Contents
