Specify Paper Source - Minolta PagePro 25 Manual

4

Specify paper source

Under "Paper Source" you can specify which tray will feed the printer.
Paper Source
Auto
Tray 1
Tray 2
Tray 3*
Tray 4*
Tray 5*
2500-sheet tray (LCC)*
Manual feed*
Manual feed*
(slide)
Manual feed*
(thick paper)
Manual feed*
(envelope)
Manual feed (company
letterhead)
* Optional paper source units
For multi-page documents, you can feed in the first page (the title page)
from a different tray than the remaining pages. To do this, proceed as
follows:
1 Activate the check box "Different paper for first page".
The dropdown list underneath, "First page", is enabled
2 Select the tray from the dropdown list that is now available from which
you want the first page to be fed in.
3
Confirm your entries with [OK].
4-8
Working with the printer driver
Description
Printing paper is taken from all available trays
Printing paper is taken from tray 1
Printing paper is taken from tray 2
Printing paper is taken from tray 3
Printing paper is taken from tray 4
Printing paper is taken from tray 5
Printing paper is taken from the 2500-sheet tray
Printing paper (plain paper) is feed into the printer through
the manual feed
Slides are fed in through the manual feed
Thick sheets of paper are fed in through the manual feed
Envelopes are fed in through the manual feed
Company letterhead paper (preprinted paper) can be fed in
through the manual feed
PagePro 25 Rev. 3.1.1/16.07.99