Scaling Document Pages In Printing; Create Duplex/Brochure - Minolta PagePro 25 Manual

4

Scaling document pages in printing

Use the "Scaling" feature to reduce or enlarge the printouts of your
document pages.
The "Scaling" feature cannot be used at the same time as the features
"N-Up" and "Fit Paper to Paper".
➜ Enter the number as a percent (%) in the "Scaling" value field to
indicate the amount by which your document pages will reduced or
enlarged when they are printed.
Maximum reduction:
max. enlargement:

Create duplex/brochure

Use the "Duplex/Brochure" feature to create two-sided printouts in
brochure format.
"Duplex" can only be used if your printer is equipped with an optional
duplex kit.
You can select from four different settings:
Duplex (two-sided print)
Additional information on duplex print, see page 6-20.
Not all menus are available at the same time!
If emulation mode is set to "Expanded" the "Brochure" feature is not
available.
The "Brochure" feature cannot be activated at the same time as the
features"N-up", "Scaling" or "Fit to Paper".
4-14
50%
200%
Binding on the short
edge
Pages in portrait format
that will be bound above
Binding on the long
edge
Portrait pages that will be
bound on the left
PagePro 25
Working with the printer driver
Brochure
Brochure open right
Pages in portrait format
that will be folded in the
middle and bound to a
book. (reading direction
from left to right)
Brochure open left
Pages in portrait format
that will be folded in the
middle and bound to a
book. (reading direction
from right to left)
Rev. 3.1.1/16.07.99