Table of Contents
Advertisement
Installing optional accessories
7.3
Installing the 500-sheet feed unit
Without the large area tray, up to three optional paper supply units can be
installed. With the large area tray, only one optional paper supply unit can
be installed.
Preparing for installation of the 500-sheet paper source unit
Take the parts of the unit out of the carton and remove the protective
1
plastic sleeves.
2
Remove the packaging materials and adhesive strips.
Remove the foam padding from the feed unit.
3
4
Turn the printer OFF and remove the power plug and the interface plug
from the printer.
Installing the 500-sheet paper source unit
When the preparations for the installation are complete, you can install the
500-sheet paper supply unit.
Remove the lower frame rail of the
1
printer.
2
Set the printer against the paper
supply unit so that the four corners
of both units are positioned next to
each other.
The blue handles on the paper
source unit point towards the front.
Rev. 3.1.1/16.07.99
PagePro 25
7
7-5
Advertisement
Table of Contents
