Installing The Horizontal Transport Unit - Minolta PagePro 25 Manual

7

Installing the horizontal transport unit

1 Remove the two small stickers from
the top of the printer.
Holes are visible under the stickers.
2
Install the two guides of the
distribution attachment for the
horizontal transport unit into the
recesses on the output tray.
When the distribution attachment is
correctly positioned, the guide pins
under the distribution attachment
engage the holes in the printer.
3 Position the horizontal transport unit
on the printer so that the gear unit is
lying in the receiving device of the
10-slot mailbox.
Open the cover of the horizontal
4
transport unit and remove the
adhesive strips from the magnetic
closing device.
Tighten the screw of the horizontal
5
transport unit in the 10-bin mailbox.
7-24
Installing optional accessories
PagePro 25
1
2
Rev. 3.1.1/16.07.99