Table of Contents
Advertisement
Recognizing and eliminating problems
Problem
The printout is too
light
Printout is too dark
Blurred
background on the
printout
Rev. 3.1.1/16.07.99
Possible cause
The save toner mode is
activated.
The toner density is not set
correctly in the print menu.
The toner in the imaging
cartridge is low.
The imaging cartridge is
damaged.
The imaging cartridge is
damaged.
The toner density is not set
correctly in the print menu.
The imaging cartridge is
damaged.
PagePro 25
Action to take
Check the setting in the printer
driver and in the printer menu.
Change the setting and try it
again.
Set the toner density to the
desired level, see page 5-13.
Remove the imaging cartridge
and shake it carefully to better
distribute the remaining toner. If
the problem persists, put in a
new imaging cartridge, see page
8-6.
Remove the imaging cartridge
and check it over for damage. If
necessary, replace it with a new
imaging cartridge, see page 8-6.
Remove the imaging cartridge
and check it over for damage. If
necessary, replace it with a new
imaging cartridge, see page 8-6.
Set the toner density to the
desired level, see page 8-6.
Remove the imaging cartridge
and check it over for damage. If
necessary, replace it with a new
imaging cartridge, see page 8-6.
9
9-19
Advertisement
Table of Contents
