Table of Contents
Advertisement
7
Installing the 2500-sheet paper source unit
When the installation of the stoppers is complete, you can proceed with
the installation of the 2500-sheet paper source unit.
1
Remove the lower frame rail of the
printer.
2
Set the printer against the paper
supply unit so that the four corners
of both units are positioned next to
each other.
The blue handles on the paper
source unit point towards the front.
Fasten the paper source unit on the
3
back of the printer.
Use the two fastening brackets
included with delivery for this
purpose.
4
Pull the tray of the 2500-sheet
paper source unit and the tray
across from it out.
5
Fasten the paper source unit to the
front of the printer.
Use the two fastening brackets
included with delivery for this
purpose.
7-10
Installing optional accessories
PagePro 25
Rev. 3.1.1/16.07.99
Advertisement
Table of Contents
