Table of Contents
Advertisement
Working with the printer driver
Stack print jobs
Stack your print jobs without job separation from one to the next.
This feature is only enabled if bins 2-5 have not been selected for the 5-bin
mailbox or if bins 2-10 have not been selected for the 10-bin mailbox.
1
Under "Output Setting", select the item "Stacker".
2
Click on the [OK] button to confirm your entries.
The dialog box disappears.
3
Start the print process.
❍
The output is to the first bin that is not used as a mailbox.
❍
bin Customarily, 1 is not used.
❍
The output for a 5-bin mailbox is from the bottom to the top and for
a 10-bin mailbox from the top to the bottom.
❍
The printer changes to the next bin if the current bin is full - without
separating jobs.
❍
If all bins are occupied, the display will indicate SEPARATE BIN
FULL and output will be continued in bin 1.
Rev. 3.1.1/16.07.99
PagePro 25
4
4-31
Advertisement
Table of Contents
