Minolta PagePro 25 Manual page 109

Working with the printer
4 Move the paper guides to the marks
of the desired Paper size.
Adjust the spacing piece on the
5
lower paper guide to match the size
of paper.
6 Tighten the fastening screws of the
paper guide in the new position.
Set the paper in place between the
7
paper guides. The stack of paper
must not exceed the maximum
filling height (see the orange mark
on the tray).
Turn the selection switch to the
8
format you have just loaded and
place the sticker on the tray to
identify the size of paper that you
have set.
9 Close the tray.
Rev. 3.1.1/16.07.99
Letter, ledger
A4, A3
PagePro 25
6
6-11