Unpacking, setting up and pre-settings
Connecting the printer (local connection)
1
Turn the printer and the computer
off.
Connect one end of the interface
2
cable to the parallel connection of
your computer.
3
Connect the other end of the
interface cable to the parallel
connection of the printer.
4
Fasten the connector in place with
the screws on the connection
socket.
For the technical specification of the cable, see page 10-4.
CAUTION
Using the wrong type of cable can result in damage to the machine!
The wrong type of cable may damage the printer's connection socket.
➜
Use only shielded interface cable of type IEEE 1284, Type B to
connect your printer to the computer.
Rev. 3.1.1/16.07.99
PagePro 25
2
2-23