Table of Contents
Advertisement
7
3
Set the frame rail that you removed
in step 1 in place on the bottom of
the paper source unit.
4
Fasten the paper source unit on the
back of the printer.
Use the two fastening brackets
included with delivery for this
purpose.
5
Pull the tray of the 250-sheet paper
source unit and the tray across from
it out.
Fasten the paper source unit to the
6
front of the printer.
Use the two fastening brackets
included with delivery for this
purpose.
7
Close the tray again.
8
Print out the printer's configuration page, see page 2-21.
The 250-sheet paper source unit is listed under the installed options
(tray 3, 4 or 5) with the status "installed".
The installation was completed successfully.
Check the settings on the left Offset and correct them if necessary, see
9
page 6-14.
7-4
Installing optional accessories
PagePro 25
Rev. 3.1.1/16.07.99
Advertisement
Table of Contents
