DAF 95XF Series Manual page 98

CAB HEATING
Inspection and adjustment
Adjusting heater valve
1. Remove the heater control panel.
2. Turn the temperature knob on the control
panel fully left (cold). Remove the fastening
clip and press the bowden cable (1) against
the stop (2) and fit the fastening clip.
3
3. Turn the temperature knob fully left (cold)
and then 10 mm right (warm).
4. Take the fastening clip off the bowden cable
and remove the heater valve.
5. Press the control arm (1) of the heater valve
against the stop (2) and fit the fastening
clip.
6. Turn the control knob fully right (warm) once
and fully left again (cold). Check that the
control arm of the heater valve abuts fully
against the stop.
7. Fit the heater control panel.
3-2
95XF series
2
10mm
1
1
K1 01 350
K1 01 351
1
2
K1 01 352
0209