DAF 95XF Series Manual page 263

1
95XF series
4.4 REMOVAL AND INSTALLATION, SEAT SQUAB GUIDE
Removing seat squab guide
1. Remove the seat squab.
2. Remove the screw (1) from the guide.
3. Remove the guide (2).
Installing seat squab guide
1. Install the guide (2).
2. Tighten the screw (1).
3. Fit the seat squab.
4.5 REMOVAL AND INSTALLATION, DUST BOOT
Removing dust boot
1. Remove the entire seat.
2. Remove the seat squab.
3. Remove the side cover on control side and
the opposite side.
4. Release the attachment caps (1) and
clamps (2) and (3).
5. Remove the seat belt mechanism and pull
the rubber boot over it.
6. Pull the rubber boot over the controls and
remove them through the bottom.
Installing dust boot
1. Install the rubber bellows.
2. Fit the seat belt mechanism.
3. Fasten the boot with the attachment caps
(1) and clamps (2) and (3).
4. Fit the side covers.
5. Fit the seat squab.
6. Install the entire seat.
0209
Removal and installation
2
1
SEATS
1
2
K100490
3
7
K100491
4-3