DAF 95XF Series Manual page 281

1
95XF series
4.29 REMOVAL AND INSTALLATION, VERTICAL DAMPER
Removing vertical damper
1. Remove the seat squab.
2. Slide the entire seat forward.
3. Remove the locking ring (2) when the seat
is in its lowest position.
4. Remove the locking ring (1).
5. Lock the seat in its highest position.
6. Remove the rubber dust boot at the front
and remove the locking ring (3).
Installing vertical damper
1. Fit the damper and use the locking ring (3)
to secure it at the bottom.
2. Release the lock.
3. Install the locking ring (1).
4. Place the seat in the frontmost and lowest
position and install the locking ring (2).
5. Before installing the seat squab, set the
damping cable (5) in such a way as to
achieve the stiffest damping when the
control handle is in the top position.
To make this adjustment, first release the
check nut (7). Retighten check nut (7) after
adjustment.
0209
Removal and installation
6 5
1
2
7
4
3
SEATS
K100516
7
4-21