1
95XF series
Tilting back the roof console
1.
Tilt the console back.
2.
Push the console as far as possible
forwards.
3.
Tighten the 4 screws (C) in the upper edge.
This means that the self-locking nuts of the
hinges (with B), may only be permanently
hand-tightened. These nuts will already
have been hand-tightened in the factory.
If the console only has to be tilted then do
not change anything.
4.
Install the sun blind guide rail and fasten the
small socket head screw.
0209
INTERNAL CAB COMPONENTS
Removal and installation
A
B
C
2
K100552
4-31