DAF 95XF Series Manual page 242

CAB TILTING MECHANISM
Draining and filling
Refilling tilting mechanism
1. Carefully loosen the filler plug 3 to 4 turns
and wait until the overpressure, if any, has
left the reservoir.
2. Remove the filler plug.
3. Turn the two-way valve into the "tilting"
position and start pumping until this is
clearly getting heavier.
4. Put the pump plunger into the lowest
position by completely moving downward
the pump actuating rod.
5. Top up the reservoir with oil, see
specification manual "Fluids and lubricants",
to the top of the pump plunger.
6. Fit the filler plug and set the two-way valve
into the "lowering" position.
6
6-2
1
95XF series
0209