DAF 95XF Series Manual page 75

1
95XF series
5. Loosen the recessed locking bolt (1) on the
outside of the vehicle and push the clutch
pedal spindle to the left.
6. Remove the clutch pedal from the inside.
Installing clutch pedal
1. Put the clutch pedal in place.
2. Apply locking compound to the recessed
locking bolt (1), see "Technical data".
3. Push the spindle to the right and tighten the
recessed locking bolt. Put silicone sealant
on the end of the clutch pedal spindle (2).
4. Fit the attachment bolt that controls the
clutch cylinder (take care with the ring).
5. Install the clutch pedal spring.
6. Fit the dashboard panels to the left and right
of the steering column.
7. Fit the steering column panel.
8. Fit the storage compartment on the engine
tunnel.
0209
INTERNAL CAB COMPONENTS
Removal and installation
1
2
2
K1 01 065
4-19