DAF 95XF Series Manual page 27

1
95XF series
3. CAB TILTING GEAR
3.1 GENERAL
Lifting cylinder
Nominal pressure
Cab tilting pump
Nominal pressure
Displacement
Pressure--limiting valve
Level check/filler plug pressure--relief valve
3.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
included in the overview of standard tightening
torques. Any other threaded connections that
are not specified must therefore be tightened to
the tightening torque stated in the overview of
standard tightening torques.
When attachment bolts and nuts are to be
replaced, it is important that they are of exactly
the same length and property class as the ones
removed, unless stated otherwise.
Lifting cylinder
Lifting cylinder cab support attachment bolts
Chassis support attachment bolt
Non--return valve seat
3.3 FILLING CAPACITIES
Cab tilting pump
Capacity of reservoir
200345
TECHNICAL DATA
400 bar
400 bar
3
4 cm
400 + 50 bar
2.5 bar
260 Nm
60 Nm
40 - 45 Nm
3
625 cm
Cab tilting gear
0
3-1